You'd usually copy and paste this information to send to our tech team in most cases. There is a "Copy to Clipboard" button which when clicked, copies all of the shown information to your clipboard for you to then paste where you'd like. Here you will find the device part number, Married Count, Married status (if the box is checked, that means the device is married), Tune Revision, EEC Type, Serial#, and the device Firmware. Used by Tech to upload firmware to the device. This option is used to transfer saved Livelink Data Log configuration files to your device for on-device data logging. (The custom tune will also remain/be available on
#BULLYDOG TUNER CHARGER DOWNLOAD#
Used to download your cloud custom tune file from the cloud and load the file directly to your device. CEF (Custom Tune) files that you have stored in your downloads folder or your desktop will display right away when you select the "Locate Custom Tunes" button. CEF files stored on your computer that are not stored within a folder. The "Locate Custom Tunes" button will allow you to locate all. The "Browse" button will allow you to browse to a specific location on your computer to find and load your custom tune files. You can also rename a custom tune file here. Used to Add/Remove custom tune (.CEF) files.
#BULLYDOG TUNER CHARGER SERIAL#
You will also find here the device Part Number, Serial Number, Firmware version, and your Vehicle Information (You must read "Vehicle Info" or "Tune" your vehicle in order for your vehicle Information to display while checking for updates.)
#BULLYDOG TUNER CHARGER INSTALL#
Do not change this unless you have physically changed the Gears in the differential to a different ratio.Īfter you have made all of the available options it will start the download process.Click here to install the Device Updater. It may ask if you want to adjust the axle ratio. Once that is done it may have you select tire size (depending on application.) Note: Every vehicle application is different, and an option that is on one application may not be available on others.ĭepending on the application it may also ask if you want to adjust the speed limiter (AKA Governor). Once you select the engine tune you are going to run it may ask for transmission tuning depending on the application For a list of potential options click here. You will have an option of Regular or Premium tune, select the tune with what fuel you are running in the vehicle. Our gas tuning is based on the octane of fuel you run. It will read the engine and transmission information and save it.Īt that point it will have a selection for “preloaded tune” and you will be able to select that. When it tells you to turn the key to the run position that does not mean start your vehicle. Make sure you follow the instructions on the screen. Select more when you are satisfied with your battery condition. You will have to read through the disclaimer and at the bottom, you will have to agree in order to continue.Īfter you accept the agreement you will be prompted to check your battery condition. It will verify the vehicle application is correct. Press the corresponding button on the left to begin the download. Once you are in the main menu you will have the option for “install download”. Once you power the device up by plugging it into the OBD2 port on the vehicle you should be able to press the top left button for the main menu. In this example, we will be focusing on the GT Gas but the GT Diesel will be similar and follows the same basic steps. Some adjustable options are only available through Vehicle functions once the vehicle has been tuned. An option available on one vehicle may not be available on a different application.
0 kommentar(er)
